Medium Cut Products
Medium Cut Products
DURAMEDIA® 30
DURAMEDIA® 30 is a fine grain aluminum oxide based ceramic media product that provides a smooth finish while still allowing for fast metal removal with medium wear. (95 lbs. /cubic foot, color: light gray)
Applications
DURAMEDIA® 30 is used in high performance cutting, deburring, and surface improvement. It produces a fine finish on all softer metals including aluminum die castings. It can also be used on copper and brass with proper compounding.
DURAMEDIA® C
DURAMEDIA® C is a coarse grain aluminum oxide, graded to ANSI B74.12 standards, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lbs. /cubic foot, color: blue)
Applications
DURAMEDIA® C is a general purpose media that leaves a bright finish for all ferrous and non-ferrous metals.
DURAMEDIA® ECH
DURAMEDIA® ECH is an aluminum oxide based ceramic media product that is used for general-purposes to produce a smooth surface finish due to the characteristics of the aluminum oxide abrasive. (90 lbs. /cubic foot, color: brown)
Applications
DURAMEDIA® ECH is intended for medium cut applications and provides high performance cutting action for deburring and metal removal.
DURAMEDIA® Plastic Low Density 40 MC
DURAMEDIA® Plastic Low Density 40 MC is resin-bonded plastic media, and the more aggressive variation of our standard 40 formula. It produces a similar matte finish and covers all the ground of 40 but with a slightly faster cycle time. (70 lbs. /cubic foot, color: green)
Applications
DURAMEDIA® Plastic Low Density 40 MC is ideal for removing burrs, flash, and die marks and blending parting lines easily and in shorter cycle times than DPLD 40.
Contact Information
Washington Mills Ceramics
165 King Street
Sun Prairie, WI 53590
📞 608-837-5155 (direct)
📞 888-676-1846 (toll free)
608-837-0808 (fax)